Description
Vehicle Fitment: 2017-2019 Ford F-350 6.7L Powerstroke
Raise your 2017-2019 Ford F-350 6.7L Powerstroke 4WD DRW with a BDS Suspension 4′ Radius Arm Lift Kit from XDP. Built to take full advantage of the factory suspension design, these 4″ radius arm systems correct suspension, steering and driveline geometry with room for 37″ tires. At the heart of this system is a pair of heavy-duty radius arms built to withstand whatever abuse you can throw at them. Built from 1-3/4″ OD – 10GA DOM
tubing with support gussets, these replacement arms are far superior to the factory stamped steel units. They use a high clearance design for extra ground clearance and are formed inward to allow for additional clearance of
oversized tires. They incorporate factory style 3-1/4″ rubber bushings to minimize road vibrations and allow for a long, maintenance-tree bushing life. The arms bolt into the factory mounting points and reposition the front axle
to correct caster angle.
The additional 4″ lift comes from a pair of full-length diesel specific Pro-Ride coil springs. These paired with your choice of BDS NX2 series gas shocks or the precision tuned FOX 2.0 performance gas shocks offer a smooth ride
and improved control over rough terrain. lo improve steering angles a torged drop pitman arm is supplied with an integrated drag link tip. Used in combination with the 1/4″ thick heavy duty track bar drop bracket will position
the front axle and keep the track bar angle in phase with the steering for improved handling. Also included for the front suspension are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets, and a NXZ series steering stabilizer with mounting bracket.
In the rear, a 5″ tabricated block with integrated bump stop wing is used in place of the tactory block to level the stance. These springs integrate an overload leat for increased load capacity while ottering smooth on-road ride
quality. Longer black e-coated U-bolts and your choice of NX2 or FOX 2.0 shocks round out this 4′ radius arm lift system.
FEATURES:
- 4″ Lift Kit
- Rear Lift Blocks
- Bump Stop Extensions
- Black E-Coated U-Bolts
- Sway Bar Urop Brackets
- Foraed Droo Pitman Arm
- High-Strength 4-Link Setup
- Brake Line Relocation Brackets
- Heavy-Duty Irack Bar Kelocation Kit
- Covered Bv BDS’s “No Fine Print” Warranty
- All Necessary Mounting Hardware Included
- Full-Length Pro-Ride Diesel Specific Coil Spring
- Choice of BUS NX2 Nitro Series or FUX 2.0 IFP Pertormance Shocks
SUGGESTED WHEEL & TIRE COMBINATIONS:
3/X12.50 w/17×9 and 4.5″ back spacing
37×12.50 w/18×9 and 4.5 -5″ back spacing
3/X12.50 w/20×9 and 4.5″ – back spacing
“Trimming may be required”
Be the first to review “2017-2019 Ford F-350 6.7L Powerstroke BDS Suspension 4″ Radius Arm Lift Kit”