2020-2022 Ford F-450 6.7L Powerstroke BDS Suspension 2.5″ Radius Arm Lift Kit

Vehicle Fitment: 2020-2022 Ford F-450 6.7L Powerstroke

The BDS Suspension 2.5″ Radius Arm Lift Kit offers improved performance in your 2020-2022 Ford F-450 6.7L Powerstroke 4WD. These kits use full length Pro-Ride coil springs designed to improve the stance of your Super Duty while taking performance, capability, and ride quality to the next level with clearance for 35″ tires. Starting of the full-length Pro-Ride dual rate coil springs provide the lift and improve overall ride quality. In place of the factory stamped steel arms this kit upgrades to heavy duty BDS radius arms. These brawny arms are built from 1-3/4″ OD heavy wall tubing, fully welded with gussets for superior strength to the factory units light weight stamped steel units they are replacing.

The heavy wall tubular construction improves strength while correcting caster with a lower cam slot. At the frame mount, a large OE-style rubber bushing is used to better isolate NHVs and allow for quiet operation without any need for maintenance. The bushings offer superior durability and quieter operation than arms with Heims and flex joints. Also upgraded as part of these new 25″ lift systems is a high strength replacement track bar designed to recenter the front axle with the lift installed. The new track bar is adjustable, built from 1-3/8″ solid steel stock with gusseted ends and a fine thread center turnbuckle with pinch bolts. The track bar comes pre-assembled and ready to bolt into the factory location to adjust to length. At one end these use a greaseable, high-durometer polyurethane bushing and the other end a heavy-duty ball joint. This setup offers strength, comfort and quiet operation over track bars that use Heims. Rounding out the front of these kits are front brake line relocation brackets to allow enough slack in the lines to cycle the suspension offroad while the sway bar relocation brackets to correct sway bar operating angle for optimal performance without sacrificing approach angle. Available with either NX2 or Fox 2.0 Performance Series front/rear shocks.

In the rear, these kits use a 2″ lift block and new black e-coated U-bolts to level stance while retaining the factory rear springs for ride quality and tow capacity. Take your Super Duty to the next level with a 2.5″ radius arm system from BDS Suspension.

FEATURES:

• 2.5″ Radius Arm Lift Kit
• 2″ Rear Lift Blocks
• Adjustable Track Bar
• Bump Stop Extensions
• Black E-Coated U-Bolts
• Sway Bar Relocation Brackets
• Brake Line Relocation Brackets
• BDS Pro-Ride Diesel Specific Coil Springs
• Covered By BDS’s “No Fine Print” Warranty
• All Necessary Mounting Hardware Included
• Choice of BDS NX2 Nitro Series or FOX 2.0 IFP Performance Shocks

SUGGESIED WHEEL & TIRE COMBINATIONS

35×12.50 w/17×9 and 4.5-5 back spacing

35×12.50 w/18×9 and 4.5-5″ back spacing

35×12.50 w/20×9 and 4.5-5″ back spacing

*trimming may be required